上海乾拓貿易有限公司
企業QQ:2880626087
電話;021-69001039
手機;17321017802(微信)
郵箱;17321017802@163.com
地址:上海市嘉定區江橋嘉涌路99弄6號713室
適合高壓和高溫。
重疊的線圈系統
緊湊型結構形式
?Media temperature up to 482°F (250°C) ? Push–over solenoid system
?For gases and fluids ? Approvals:
Type 2508 Cable plug
Type 1078 Timer unit
Type 2511 ASi cable plug
Type 8600 Dosing control
Type 0255 can be combined with…
The direct–acting plunger solenoid valve Type 0255 is also suitable for high pressures and high temperatures.
Circuit function A
2/2–way valve, normally closed by spring force
FM
For selecting the correct product please refer to the technical data,
images and notes for proper use according to the data sheet.
/2通電磁閥適用于高壓和高溫
調頻
技術參數孔徑DN 2.0 - 6.0 mm主體材料黃銅帶不銹鋼閥座1.4305或不銹鋼1.4581密封材料PTFE(其他要求)介質FKM PTFE熱空氣,熱油,添加劑油,每溶液水,蒸汽,燃料,液壓材料,酒精,有機溶劑,廢氣介質溫度可根據要求提供PTFE -40°F至356°F(-40°C至+ 180°C)高達482°F(+ 250°C)較大粘度21 cSt環境溫度131°F(+ 55°C)(482°F(+ 250°C)),請參見訂購圖電壓公差±10%占空比100%連續額定值電氣連接?電纜插頭?7 mm電纜(標準配置)防護等級IP 65帶電纜插頭安裝根據需要,較好用執行器垂直
流量CV值水[GPM]
在68°F(+ 20°C)下測量,閥入口處有1 PSI壓力和自由出口(見訂購圖)壓力閥[PSI]相對于當前大氣壓力的表壓(見訂購圖)響應時間[ms]
開口堵塞
在閥門出口處用水測量,87 PSI和68°F(+ 20°C)壓力積聚0至90%壓力衰減100至10%(見訂購圖)
?Seat valve, direct–acting ? Pressure range up to 507 PSI
?直接作用的閥門?壓力范圍高達507 PSI?介質溫度高達482°F(250°C)?推過電磁閥系統?用于氣體和流體?:
類型2508電纜插頭
類型1078定時器單元
類型2511 ASi電纜插頭
類型8600計量控制
類型0255可以與...組合
0255型直動式柱塞電磁閥也適用于高壓和高溫。
電路功能A
2/2通閥,常閉彈簧力
Technical data Orifice DN 2.0 – 6.0 mm Body material Brass with stainless steel seat 1.4305 or stainless steel 1.4581 Seal material PTFE (others on request) Media FKM PTFE Hot air, hot oils, oils with additives, per–solutions Water, steam, fuels, hydraulic materials, alcohol, organic solvents, waste gas Media temperature PTFE on request –40°F to 356°F (–40°C to +180°C) Up to 482°F (+250°C) Viscosity Max. 21 cSt Ambient temperature 131°F (+55°C) (482°F (+250°C) on request), please see ordering chart Voltage tolerance ± 10% Duty cycle continuous rating Electrical connection ? Cable plug for ? 7 mm cable (supplied as standard) Protection class IP 65 with cable plug Installation As required, preferably with actuator upright
Flow rate CV value water [GPM]
measured at 68°F (+20°C), 1 PSI pressure at valve inlet and free outlet (see ordering chart) Pressure valves [PSI] gauge pressures with respect to the prevailing atmosphere pressure (see ordering chart) Response times [ms]
Opening Closing
measured with water at valve outlet at 87 PSI and 68°F (+20°C) pressure build-up 0 to 90% pressure decay 100 to 10% (see ordering chart)
021-39526589
網址:m.duyguyilmazz.com
地 址:上海市嘉定區嘉涌路99弄
6號樓713室