日本SMC速擺動氣缸材質說明 SMC速擺動氣缸
LVM20/200 2特長接液部材質主體/底板PEEK
膜片可從EPDM,FKM,Kalrez?中選擇
aone-sweep testperformed in theaxial and right an
電 話:021-39529830轉8009
手 機;18917074297
企業QQ;2880626083
郵箱;18917074297@163.com
for both energizedandde-energ
ized states. (Value in the initial stage)
日本SMC速擺動氣缸材質說明 SMC速擺動氣缸
Nominal filtration rating: 0.01 μm (filtration efficiency 99.99%)
Initial pressure drop: 0.03
MPa (at inlet pressure 0.7 MPa,maximum flow)
計算控制流量的范圍然后從產品樣本上查節流特性曲線
Thetest was performed one time each i
選擇速度控制閥范圍的規格即控制流量
范圍應處于速度控制閥的節流特性曲線的流量范圍內
較大控制流量應小于節流閥的全開時的流量如希望均勻調節
ofthe main valve and armature,for both en
Maximum operating pressure: 1.0 MPa (at 20°C)
壽命1000萬次閥體氨酯合成橡膠座閥式閥芯可在高壓環境下使用
日本SMC速擺動氣缸材質說明 SMC速擺動氣缸
021-39526589
網址:m.duyguyilmazz.com
地 址:上海市嘉定區嘉涌路99弄
6號樓713室